OILSERV were very satisfied with the support given by APS on a recent high profile job in Iraq. The job was completed using a 9.5” SureShot™ EM DG MWD tool drilling the 26” section from vertical to 24 degrees inclination at section TD (100-524m). The tool was then picked up again for the next 17.5” section to continue building to 55 degrees inclination at the section TD (524-1354m). A total of 1254m was drilled in a total of 312 circulating hours over 3 runs.
Wallingford, CT, USA - 8 August, 2017 – APS Technology Inc. today announced the successful deployment of the SureSteer™-RSS™ 475 Rotary Steerable System with the SureLog-WPR™ Wave Propagation Resistivity sensor in Western Siberia. The directional staff drilled a re-entry well and, with the RSS475, was able to maintain the target inclination and azimuth in the lateral and, when needed, corrected the steering course of the wellbore in response to the real-time gamma and resistivity logs.
Wallingford, CT, USA - 7 July, 2017 - APS Technology would like to congratulate Scott Burch, owner and field superintendent of SB Directional on recently completing their first geosteered lateral using the APS WPR resistivity LWD tools. This 4500’ lateral evaluated the Woodford shale and Kinderhook formations in Dewey County, OK. The job, supported by both APS Technology and SB Directional personnel, had zero downtime associated with the WPR tool strings and also utilized the new APS Advanced Decoding System (ADS), which provided excellent / trouble free decoding.
Wallingford, CT, USA – 14 October, 2016 - APS Technology, Inc. announced the introduction of a new Advanced Decoding System (ADS) which represents a significant improvement in decoding capability, and will also be the platform for introducing higher data rate service when coupled with APS’s Gen5 HDR Pulser. The new platform is PC based with a simple yet powerful user interface that allows the operator to quickly see noise and modify filters to improve signal to noise ratio and decoding in difficult situations.
Wallingford, CT, USA – 8 August, 2016 – APS Technology, Inc. was recently awarded a U.S. Department of Energy Small Business Innovation Research (SBIR) Project grant to fund research for a “Vertical Steering Borehole Drilling Tool Incorporating Formation Water Salinity and Fracture Zone Detection Sensing.”
Wallingford, CT, USA – 1 August, 2016 – APS Technology, Inc. today announced opening of a new sales office and repair center in Oktyabrsky, Bashkortostan, Russia.
“APS has done export sales business in the Russia market for more than 10 years,” said Denis Biglin, APS’s Senior Vice President. “This new location will allow us to serve our Russian and CIS country customers more directly.”
The new location in Oktyabrsky will provide repair and maintenance for APS MWD and drilling products, as well as sales support for new and existing Russia and CIS customers.
Wallingford, CT, USA – 4 July, 2016 – APS Technology, Inc. today announced another depth record for APS MWD in China.
Wallingford, CT, USA – June 1, 2016 – APS Technology, Inc. today announced further expansion of its USA headquarters.
“This strategic expansion is a key part APS’s long-term plans to bring innovative technology not only to the oil and gas industry, but also to other markets with challenging equipment environments,” said William Turner, APS’s President.
APS HQ – Wallingford, CT, USA – 2 May 2016 – APS Technology, Inc. today announced an exciting development project, APS’s SureDrill™ SDM™. The Surface Drilling Mechanics (SDM) is a wireless instrumented top drive sub that houses all of the essential sensors used for monitoring drilling, drilling optimization, rig automation and rig condition monitoring. The SDM is an instrumented sub which can be mounted just below, or integrated with the top-drive.
As part of this development effort APS is actively seeking industry partners to participate in this exciting development.
APS HQ – Wallingford, CT, USA – 2 May 2016 – APS Technology, Inc. today announced a new product which provides an easy path to add APS LWD equipment to other MWD platforms. Previously this was done on a custom basis for a variety of worldwide customers who wanted access to APS’s market-leading Wave Propagation Resistivity (WPR™) LWD, and other MWD/LWD sensor subs.