Oilfield-grade and aerospace materials machining

Precision CNC Manufacturing & Support Services

Downloads:

APS Technology offers our clients an advanced CNC manufacturing facility, combined with our experienced engineering, analysis, assembly and inspection capabilities. Our machinists are experienced in oilfield-grade and aerospace materials machining. Examples of our state-of-the-art machines are shown below.

MAZAK INTEGREX 300 III-ST Multi-Axis CNC Mill-Turn CenterMAZAK INTEGREX 300 III-ST Multi-Axis CNC Mill-Turn Center

  • 24 in. swing x 60 in. length between centers
  • 12,000 rpm top head spindle with 40 tool changer
  • MAZATROL 640MT control
  • 3.05 in. through-the-bore spindle
  • Lower turret and sub-spindle
  • High-pressure coolant through spindle

MAZAK INTEGREX 300Y 5-Axis CNC Mill-Turn Center

  • 24 in. swing x 43 in. length between centers
  • MAZATROL 640MT control
  • 3.05 in. through-the-bore spindle
  • 10,000 rpm live spindle with 40 tool changer
  • High-pressure coolant through spindle

MAZAK Slant Turn 50 LatheMAZAK Slant Turn 50 Lathe

  • CNC turning center with 120 in. length between centers
  • MAZATROL 640T control
  • 10-1/4 in. through-the-bore spindle
  • Front and rear 24 in. 4-jaw chucks
  • Programmable steady rest
  • High-pressure coolant through spindle

MAZAK QT250HP (2 units)

  • CNC turning center with 20 in. between centers
  • Mazatrol 640T fusion control
  • 3.1 in. through-the-bore spindle
  • 10 in. chuck and collets

MAZAK V-655/80N Vertical Machining CenterMAZAK V-655/80N Vertical Machining Center

  • Full 4-axis control with 10in. through-the-bore rotary table
  • 80 in. x 25 in. x 30 in. travel
  • CAT 50 taper tool holders
  • High-pressure coolant through spindle

MAZAK LEXUS 410B 4-Axis CNC Mill

  • Travel: 30 in. x; 16 in. y; 20 in. z
  • 12,000 rpm spindle
  • CAT 40 30 tool changer
  • 4-axis rotary table
  • High-pressure coolant through spindle

BRIDGEPORT VMC 800BRIDGEPORT VMC 800

  • 4-axis vertical milling center
  • Bridgeport PC-based CNC control
  • 19 in. x 38 in. x 18 in. travel
  • 40-taper tool holders

BRIDGEPORT Series I and Series II Mills with 2-D Programmable CNC Control

CHARMILLES ROBOFIL 310 Wire EDMCHARMILLES ROBOFIL 310 Wire EDM

  • 33.5 in. x 19.7 in. x 15.75 in. max. size workpiece capability
  • 30° taper with independent movement of upper and lower wire heads
  • Fully CNC
  • Automatic wire threading

ECM DEBURR

  • Allows accurate deburring of gun-drilled hole intersections in typical LWD subs

> APS Services